Product Category: Controls

Select any product to see details and ordering options.
Many of our products have a number of options. Be sure to choose the best option for you from the pop-up menu at the bottom of the page next to the "Add To Cart" button.
 

12v Power Supply

Power for Direct Control Boards (up to 24 Tortoise Machines). Several Direct Control Boards may be plugged together in a series to share a common power supply. Imported component. US plug. Customers who would like to use larger or centralized power supplies may use our Terminal Power Adapter. Alternate 12v supplies must be switching or filtered More Info »
Price: $10.90

24v High Voltage Power Supply

Many older coil operated switch machines were designed for 14-16v AC power, which includes 20v instantaneous voltages. For those switch machines 12v is not enough. Our Higher Voltage Supply provides power for Snap Action Bases and Snap Bipolar Bases driving switch machines that need an extra kick. These supplies is are between 22V and 24v More Info »
Price: $18.90

3 Pin Extension Cables

Extension cables for Berrett Hill Touch Controls, Low Power Plugin Kits, Relays, and Servos. More Info »
Price: from $4.20
Choose Option »

5v Power Supply

Power for Servo Control Base. Each Servo Control Base requires it's own power supply. Imported component. US plug. Customers who would like to use larger or centralized power supplies may use our Terminal Power Adapter. Alternate 5v supplies must be switching or computer type supplies. Older unfiltered DC will not work with our equipment. Our international customers are More Info »
Price: $10.90

Contact Spacers for Sullins Sockets

A package of 12 sets of clip-on spacers for the ends of pre-2017 Sullins edge connectors that properly center the socket in the socket of a Circuitron brand Tortoise switch machine. These are the long awaited solution to poorly fitted edge connectors on the popular Tortoise switch machine. These are the same spacers we created to More Info »
Price: $4.90

DC Extension and Wye Cables

Now you can extend your DC power far from an outlet, or share power from one control location to the next - all with plug-together simplicity.Our barrel connector DC Power Extensions offer 6 or 9 feet of reach, and can be daisy-chained from one to the next for really long runs. Keep your AC power More Info »
Price: from $5.90
Choose Option »

DC Terminal Power Adapters

Some of you have wanted to power your controls with your own power supplies. This little barrel adapter lets you wire power to terminals at any of our Control Bases. Our Direct Bases are intended to operate at 12vDC but are not too fussy; 9vDC to 15vDC is acceptable. DC power must have some filtering, More Info »
Price: from $3.40
Choose Option »

Direct Base for Tortoise machines

Ideal for Tortoise and other stall-motor machines, low power lighting circuits and other 12 volt uses up to 60ma. We offer just the Bases, or a Panel Package comes that comes with either 2, 4, or 8 Touch Toggles and a 2, 4 or 8 output Base. Our Direct Bases each have pairs of wire-clamping screw terminal outputs. The terminals More Info »
Price: from $16.90
Choose Option »

Grove System Adapters

The Grove System is a popular plug-together approach for Arduino Development. Our adapters connect to Grove System plugs and offer connections to two Touch Toggle sockets. Touch Toggles can be used as direct inputs reading HIGH when the Toggle is green, and LOW when the Toggle is red. Momentary Touch controls are LOW when touched, More Info »
Price: from $3.90
Choose Option »

Inline Signal Booster for Third Party Electronics

When adapting our touch controls to third party electronics sometimes a boost is needed to the signal line. This small device connects between the Touch control and a 3-pin extension running to an input. The Signal Booster is about 1/2" x 1/4" x 2" and is in a shrink wrapped package. This active booster passes the More Info »
Price: from $5.90
Choose Option »

Input Splitter

The Input Splitter connects a single Touch Toggle to 2 or 3 Base inputs. The inputs can be side by side on just one base, or connected to separate bases to perform different functions together. A good use is to operate two Snap type turnouts in a crossover situation with only one Toggle. Please note that More Info »
Price: from $5.90
Choose Option »

LED Driver for Signals

  Put lighted signals on your layout, matched to your switch settings! The LED Driver powers trackside signals or other LEDs from our control bases. Signal indicators of your commercial signal mast, dwarf signal, or plain LED will match the switch position, and Touch Toggle indication. These drivers provide power even when there is no More Info »
Price: from $7.90
Choose Option »

Mini-Cup Toggles

Sometimes a single control is all you need. When a control panel is overkill these self mounting Touch Toggles can do the job well. Our Mini-Cup Toggles offer a recessed surface mount with a Touch Toggle built in. The flanged, self trimming design mounts in a one inch hole. The control is recessed just enough to keep More Info »
Price: from $11.90
Choose Option »

Multi-Input Adapter

Our Multi-Input Adapter makes two or three Toggles indicate and operate as one. Touch a Toggle on one panel and a matching control in a second panel throws too. The indicators on every Toggle will always show the same color: Add a second panel on the opposite side of a peninsula or module. Control an in-between More Info »
Price: from $7.90
Choose Option »

Powered Tortoise Adapter

Tortoise machines are most commonly controlled using our Direct Base Systems which handle multiple machines. Our Powered Tortoise Adapter is a handy problem solver. This Powered Tortoise Adapter mounts right on a Tortoise! So easy to mount and wire - It's a single Tortoise powering control base built into a socket adapter. Just connect to DC, or DCC power, More Info »
Price: from $16.90
Choose Option »

Real-Switch Relay Controls

Sometimes you just need to turn something on and off. Control lights, accessories, uncouplers, signals, motors, AC circuits. Anywhere you'd use an on/off switch. Relays are real switches. They're fully isolated which makes them ideal to control track power, high voltage or high current circuits, lighting, and signals. Our Real-Switch Relay Bases come with two More Info »
Price: from $16.90
Choose Option »

Ribbon Cable Connectors

WE WILL HAVE A PHOTO SOON.  Our Ribbon Cable Connectors let you connect up to 8 Touch Toggles to a 10 conductor ribbon cable. Our Output Ribbon Connector can directly plug into any of our 8 channel bases. Custom routing can be done with our 3-pin Extensions. Toggles can be connected to our Input Ribbon Connector. Touch More Info »
Price: from $32.80
Choose Option »

Servo Control System

Get RC model servos to do your bidding! Small model radio-control type steering motors are a great way to operate turnouts and create animation. These Servo Motors are an inexpensive, flexible alternative to traditional switch machines, and the best way to add animation to your layout.Touching each Toggle moves a servo from one position to More Info »
Price: from $26.90
Choose Option »

Servo Under-Table Mount

Servo motors from the radio control world are becoming popular to operate model railroad turnouts. The 9 gram sized servos are the popular size for this, with enough power and a great price point. Mounting the little servos is one of the trickiest parts of using them to run your railroad. Our under-table style servo More Info »
Price: from $5.60
Choose Option »

Servo Well Mount

Servo motors from the radio control world are becoming popular to operate model railroad turnouts. The 9 gram sized servos are the popular size for this, with enough power and a great price point. Mounting the little servos is one of the trickiest parts of using them to run your railroad. Our innovative well mount "Manhole" More Info »
Price: from $5.60
Choose Option »

Servos

Tiny "8 to 11 gram" servos are suitable for operating turnouts and small animations. Plenty of torque and throw for any scale of model railroad. Standard servo plugs connect into one output of our Servo Control Base unit. While we do not feel that we are able to reliably source the exact same model of More Info »
Price: from $6.90
Out of Stock

Setup Remote

  Our Setup Remote is used with our Servo Base to set the start and stop limits for servo operation. Servo Control Base come adjusted with a short stroke for installation, but are only usable when set to your exact requirements. Our Setup Remote lets you set each servo to the exact stop positions and speed to More Info »
Price: from $19.90$12.90
Choose Option »

Setup Remote Extension Cables

Our Setup Remote is used with our Servo Base to set the start and stop limits for servo operation. To extend servos or Touch Toggles use 3-Pin Extensions These cables are used to connect the Base and Remote during setup. We offer 7 foot (2m) and 25 foot (7.5m) cables to connect a Servo Base to More Info »
Price: from $6.95
Choose Option »

Signal Adapter for Tortoise

This adapter powers LED signal lights from our Direct Base polarity reversing stall-motor power. The easy-to-wire adapter can power either common-cathode (negative common) or common-anode (positive common) dwarf or other two light route indication signals. Our Signal Adapter will also work with any stall motor supply, decoder, or hard-wired switch connection. The Signal Adapter may More Info »
Price: from $6.90
Choose Option »

SMAIL Translator Adapter

This controller mounts right on a SMAIL! It's easy to mount and wire - It's a Touch Toggle translator built right into a socket adapter. Just connect DCC power to the easy-wire terminals, plug in the Touch Toggle, and push the socket onto your Smail Turnout motor. The Touch Toggle is connected right at the turnout, so wiring More Info »
Price: from $19.90
Choose Option »

Snap Action Base for Twin-Coil 3-Wire machines

Operate your traditional 3-Wire Twin-Coil switch machines with Touch Toggles. Our Snap-Action Base unit gives the Touch Toggle system the ability to control the traditional 3-wire twin-coil switches from Atlas, Bachmann, Peco, and any of the N, HO, or O scale snap type machines that operate on 12-24 volts. This base works with any style of our More Info »
Price: from $39.90
Choose Option »

Snap Bipolar Base for 2-Wire coil machines

Our 2-Wire Snap Bipolar Base. The new base has 2 terminals to connect each polarized switch machine.  Operate your Kato, Rokuhan, Rapido Trains, or other 2-wire snap switch machines with Touch Toggles. Our new Bipolar Snap-Action Base unit gives the Touch Toggle system the ability to control modern 2-wire polarized switches from Kato, Rapido Trains. This base works More Info »
Price: from $42.90
Choose Option »

Terminal Base Input

PHOTO SOON: TBC4 - 4 input Terminal Base Control input unit Sometimes you want to run one of our base units with something other than a Touch Toggle. The Terminal Base Control lets you operate our bases with your own controls. Hardware switches, relay contacts, or 5 - 12 volt input signals can control four More Info »
Price: $14.90

Third-Light Indicator

The control solution for crossovers!   The Third-Light adds a  second green light to a two light Touch Toggle. This creates a display with either two green lights, or the middle red light showing. The result is perfect for a crossover, with a red light in the middle on the crossover track, and two green More Info »
Price: from $8.60
Choose Option »

Three Way Switch Adapter

Our Three Way Switch Adapters are small plug in units that use 2 or 3 Toggles to control the two switch machines on a three way switch in a logical manner. They will work with any of our control bases, so you can use them to run just about any kind of switch machines. These adapters More Info »
Price: from $14.90
Choose Option »

Toggle Access Base

WE WILL HAVE A PHOTO SOON. TAB4 - Toggle Access Base The Toggle Access Base lets you use screw terminals to wire directly to the logical output of up to four Touch Toggles. Available as just the Base, or in a Panel Package comes that includes 4 Touch Controls of your choice. This base offers a direct connection More Info »
Price: from $16.90
Choose Option »

Toggle Placement Tool

Our Toggle Placement Tool makes getting Two-Light Touch Toggles accurately lined up in a control panel easy. Just one Toggle Placement Tool is all you need to align all of your Toggles. The most common method of final Toggle placement behind your panel graphic is to power it and while watching from the front, move the More Info »
Price: $12.90

Tortoise Switch Machine Easy-Wire Adapters

The best adapters at a great price! Works great with the new wider Tortoise connectors! Connect Tortoise switch machines to our Touch Control System or any other without solder! Stripped wires from 14 gauge to 22 gauge firmly connect with just a screwdriver to wire-clamping screw terminal connections. A sturdy socket with gold plated slide-on contacts pushes easily More Info »
Price: from $6.40
Choose Option »

Touch Control for MRServo

Nathan Holmes over at Iowa Scaled Engineering has worked out a great way to get Touch Toggles to work with their single servo operator, the MRServo. Our products were electronically compatible, but difficult to connect until Nathan came up with an elegant idea. Our kit packages the two parts you'll need to make the connection; A More Info »
Price: from $10.90
Choose Option »

Touch Control for Tam Valley Depot Products

Our Touch Triggers are specially made touch controls that can directly replace most* Tam Valley Depot fascia controls. They use the same 3-pin plugs and plug right in. (*For Tam Valley Depot Loconet boards see the note below). We offer our standard "behind the scenes" style that match the size and shape of our original More Info »
Price: from $7.90
Choose Option »

Touch Toggles

Touch Toggles let you create dependable touch-screen control panels with just scissors and tape. When mounted behind a translucent surface (paper behind glass, plastic, etc.) the glowing light from the Touch Toggle indicates both the place to touch, and the controls operational condition. Toggle Toggles alternate from on to off with each touch (touch on, More Info »
Price: from $8.60
Choose Option »

Touch Triggers

A special Touch input for electronic circuits like Tam Valley Depot, Team Digital, RR Circuits Tower-LCC controller, and user programmed micro controllers. Touch Triggers only work with circuits that actively control the indicator lights. Touch Triggers are exactly the same size and shape as our popular Touch Toggles and have the same choice of display indications. They More Info »
Price: from $8.60
Choose Option »

Universal Translator links Toggles to DCC

Our Universal Translator lets you use Touch Toggles with DCC decoders Ordinarily Touch Toggles and our bases manage the position of the each output directly - with one position for green and another for red. Using Touch Toggles with DCC decoders, network, or computer systems is a bit more complicated. Each of these systems can change a More Info »
Price: from $34.90
Choose Option »

Walthers Control System Adapter

Use Touch Toggles to operate Walthers brand switch machines. Production is on hold. Please contact us for more information. info@berretthill.comThis plug-in adapter mounts directly on the Walthers machine. This adapter is so small it doesn't extend beyond the vertical machine's mounting dimensions. Works with any of the control devices in the Walthers system, including the More Info »
Price: from $12.90
Out of Stock

Wye Track Adapter

Our Wye Adapter is a small plug in unit that uses three Toggles to control the switch machines installed in a wye track arrangement. It lets you choose your route through the wye in an obvious way. It works with any of our control bases, so it can control just about any kind of switch machine. More Info »
Price: from $14.95
Choose Option »

Comments are closed.