Toggle Access Base

WE WILL HAVE A PHOTO SOON. TAB4 – Toggle Access Base

The Toggle Access Base lets you use screw terminals to wire directly to the logical output of up to four Touch Toggles. Available as just the Base, or in a Panel Package comes that includes 4 Touch Controls of your choice.

This base offers a direct connection to the Toggle logic level sense line.  Link your own equipment directly to Touch Toggles with this pre-assembled circuit.

The Touch Toggle sense line is a 5v logic connection for electronic control. You can read about the simple and more complex ways of using this connection with Arduinos, Raspberry Pis, TTL and CMOS logic here: Using Touch Toggles in your own electronic project.

Each Terminal Base Control has 6 wire clamping screw terminal connections for wires from 26 to 14 gauge.The first 4 terminals connect to the Touch Toggle sense lines. The 2 remaining terminals connect to 5 volts and ground.

You will need a power supply; either a barrel connector 12v Power Supply or a terminal wired 5v supply. Our Toggle Access Base, like all of our 12v bases can share a supply single for up to 24 controls. Power sharing connectors on the sides of the base let bases connected in a daisy-chain and powered from a single power supply. You can use your own supply with a 5.5mm barrel plug and a positive center. Read About Power For Touch Toggles for more information.

 

Choose below for the Package size and the style of Touch Toggle that suits your design. Toggles come with one of three light arrangements with different appearances but identical in function. Read More about Touch Toggles

tt-black

Two Light Red/Green Touch Toggles
tt-grey
One Light Red/Green Touch Toggles

Our Mini-Cup Toggles are ready-to-install fascia controls that fit in a 1″ hole in your fascia. Now in one-light and two-light versions. If there’s more than 12 inches between the Toggle and your base be sure to look into our 3-pin Extensions.

mini-toggle-1lightmini-toggle-2light

Legal stuff: This product contains chemicals known to the state of California to cause cancer (lead). Unused or retired products should be recycled properly or may be returned to Berrett Hill for disposal in accordance with RoHS standards.

We manufacture our products in the USA. Orders over $100 include free shipping to US addresses.

Be sure to make the right choice from the pop-up menu and set the correct quantity below.

   

Comments are closed.