Interface Base

Our Interface Base will connect up to 8 Touch Toggles to a terminal output. The Base has a 5v barrel connector or terminal connections to power the Toggles. The output is a 5v open connector to ground used by many DCC boards,  micro-controller boards, or Raspberry Pi type computers, for manual inputs. Momentary and Toggle touch controls connect to this base and wire directly to the inputs of any switch-to-ground inputs. Use this base to simplify your home-brewed electronic projects, or Toggle inputs to compatible electronics like NCE Mini Panel, Switchit boards, and the like.

This board should become available on March 23 or so.


Comments are closed.