Product Category: Adapters

Select any product to see details and ordering options.
Many of our products have a number of options. Be sure to choose the best option for you from the pop-up menu at the bottom of the page next to the "Add To Cart" button.

Cab Selector

Sophisticated operation on layouts on DC power usually needs more than one throttle. Each block section of track can connect to  more than one throttle, and your locomotives are no longer limited to one-at-a-time movements. Cab Selectors let Touch Toggles choose power from 2 or 4 sources to a block. All block selections are exclusive, More Info »
Price: from $15.90
Choose Option »

Contact Spacers for Sullins Sockets

A package of 12 sets of clip-on spacers for the ends of pre-2017 Sullins edge connectors that properly center the socket in the socket of a Circuitron brand Tortoise switch machine. These are the long awaited solution to poorly fitted edge connectors on the popular Tortoise switch machine. These are the same spacers we created to More Info »
Price: $4.90

DC Extension and Wye Cables

Now you can extend your DC power far from an outlet, or share power from one control location to the next - all with plug-together simplicity. Our barrel connector DC Power Extensions offer 6 or 9 feet of reach, and can be daisy-chained from one to the next for really long runs. Keep your AC More Info »
Price: from $5.90
Choose Option »

DC Terminal Power Adapters

Some of you have wanted to power your controls with your own power supplies. This little barrel adapter lets you wire power to terminals at any of our Control Bases. Our Direct Bases are intended to operate at 12vDC but are not too fussy; 9vDC to 15vDC is acceptable. DC power must have some filtering, More Info »
Price: from $3.40
Choose Option »

Grove System Adapters

The Grove System is a popular plug-together approach for Arduino Development. Our adapters connect to Grove System plugs and offer connections to two Touch Toggle sockets. Touch Toggles can be used as direct inputs reading HIGH when the Toggle is green, and LOW when the Toggle is red. Momentary Touch controls are LOW when touched, More Info »
Price: from $3.90
Choose Option »

Inline Signal Booster for Third Party Electronics

When adapting our touch controls to third party electronics sometimes a boost is needed to the signal line. This small device connects between the Touch control and a 3-pin extension running to an input. The Signal Booster is about 1/2" x 1/4" x 2" and is in a shrink wrapped package. This active booster passes the More Info »
Price: from $6.60
Choose Option »

Input Splitter

The Input Splitter connects a single Touch Toggle to 2, or 3 inputs. The inputs can be side by side on just one base, or connected to separate bases to perform different functions together. A good use is to operate two Snap type turnouts in a crossover situation with only one Toggle. Please note that this More Info »
Price: from $5.90
Choose Option »

LED Driver for Signals

Put lighted signals on your layout, matched to your switch settings! Works with any of our Touch Toggle Bases, even Snap Bases for coil type machines. The LED Driver powers trackside signals or other LEDs from our control bases. Signal indicators of your commercial signal mast, dwarf signal, or plain LED will match the switch More Info »
Price: from $7.90
Choose Option »

Matrix Controller

Like the "Diode Matrix" of old, the Matrix Controller lets you choose one track with each Touch Toggle, instead of operating an individual turnout. This is a complete route control system, with each touch setting many outputs to preset positions. Align selected turnouts to create open “routes” through complex trackwork. Customize operations for each Toggle More Info »
Price: $69.80

Memory Adapters

Memory Adapters hold individual Toggle positions when powering up the Touch Toggle system. Traditionally Touch Toggles start in the Green position, but adapters (and certain Base units) can remember and control the startup position. These adapters are simply plugged into bases, and the Toggles are plugged into the adapter. They can easily be added to More Info »
Price: from $12.90
Choose Option »

Multi-Input Adapter with Memory Option

Our Multi-Input Adapter makes two or three Toggles indicate and operate as one. Touch a Toggle on one panel and a matching control in a second panel throws too. The indicators on every Toggle will always show the same color: Add a second panel on the opposite side of a peninsula or module. Control an in-between More Info »
Price: from $8.90
Choose Option »

Powered Tortoise Adapter

Our Powered Tortoise Adapter is a handy problem solver for modules and distant Tortoise motors. Tortoise machines are most commonly controlled using our Direct Base Systems which handle multiple machines from a single base.  This Powered Tortoise Adapter mounts right on a Tortoise! So easy to mount and wire - It's a single Tortoise powering control base built More Info »
Price: from $17.90
Choose Option »

Pulse Follower Adapter

This adapter lets a short power pulse set a Touch Toggle to green or red. The adapter senses a voltage in AC or DC (either polarity) between the center common terminal, and the red or green terminals. The brief external pulse of power can be from 5v to 24v, AC or DC. The inputs are More Info »
Price: from $9.90
Choose Option »

Signal Adapter for Tortoise

This adapter powers LED signal lights from our Direct Base polarity reversing stall-motor power. The easy-to-wire adapter can power either common-cathode (negative common) or common-anode (positive common) dwarf or other two light route indication signals. Our Signal Adapter will also work with any stall motor supply, decoder, or hard-wired switch connection. The Signal Adapter may More Info »
Price: from $6.90
Choose Option »

SMAIL Translator Adapter

This controller mounts right on a SMAIL! It's easy to mount and wire - It's a Touch Toggle translator built right into a socket adapter. Just connect DCC power to the easy-wire terminals, plug in the Touch Toggle, and push the socket onto your Smail Turnout motor. The Touch Toggle is connected right at the turnout, so wiring More Info »
Price: from $21.90
Choose Option »

Third-Light Indicator

The control solution for crossovers!   The Third-Light adds a  second green light to a two light Touch Toggle. This creates a display with either two green lights, or the middle red light showing. The result is perfect for a crossover, with a red light in the middle on the crossover track, and two green More Info »
Price: from $8.60
Choose Option »

Three Way Switch Adapter

Our Three Way Switch Adapters are small plug in units that use 2 or 3 Toggles to control the two switch machines on a three way switch in a logical manner. They will work with any of our control bases, so you can use them to run just about any kind of switch machines. These adapters More Info »
Price: $15.90

Toggle Placement Tool

Our Toggle Placement Tool makes getting Two-Light Touch Toggles accurately lined up in a control panel easy. Just one Toggle Placement Tool is all you need to align all of your Toggles. The most common method of final Toggle placement behind your panel graphic is to power it and while watching from the front, move the More Info »
Price: $12.90

Tortoise Easy-Wire Terminal Adapters

The best adapters! Works great with the new wider Green-Board Tortoise connectors! Connect Tortoise switch machines to our Touch Control System or any other without solder! Stripped wires from 14 gauge to 22 gauge firmly connect with just a screwdriver to wire-clamping screw terminal connections. A sturdy socket with gold plated slide-on contacts pushes easily onto the Tortoise More Info »
Price: from $5.90
Choose Option »

W Route Adapter

The W Track Adapter handles the 3 turnouts where a 2 track main becomes a 3 track main with a center passing track. Two Touch Toggles clearly indicate all routes, while automatically operating the third center-track turnout. Selecting the center track route to either mainline automatically clears the opposing main. This adapter prevents derailments and More Info »
Price: $15.90

Wye Track Adapter

Our Wye Adapter is a small plug in unit that uses three Toggles to control the switch machines installed in a wye track arrangement. It lets you choose your route through the wye in an obvious way. It works with any of our control bases, so it can control just about any kind of switch machine. More Info »
Price: from $15.90
Choose Option »

Comments are closed.