Product Category: Touch Controls

Select any product to see details and ordering options.
Many of our products have a number of options. Be sure to choose the best option for you from the pop-up menu at the bottom of the page next to the "Add To Cart" button.
 

3-Pin Extension Cables

Extension cables for Berrett Hill Touch Controls, Low Power Plugin Kits, Relays, and Servos. More Info »
Price: from $5.90
Choose Option »

Direct Base for Tortoise machines

Ideal for Tortoise and other stall-motor machines, low power lighting circuits and other 12 volt uses up to 60ma. We offer just the Bases, or a Panel Package comes that comes with either 2, 4, or 8 Touch Toggles and a 2, 4 or 8 output Base. Our Direct Bases each have pairs of wire-clamping screw terminal outputs. The terminals More Info »
Price: from $17.90
Choose Option »

Grove System Adapters

The Grove System is a popular plug-together approach for Arduino Development. Our adapters connect to Grove System plugs and offer connections to two Touch Toggle sockets. Touch Toggles can be used as direct inputs reading HIGH when the Toggle is green, and LOW when the Toggle is red. Momentary Touch controls are LOW when touched, More Info »
Price: from $3.90
Choose Option »

Inline Converters

Sometimes you have Touch Toggles and you need Touch Triggers, or you have Triggers and need Toggles. Our Toggle Inline Converter has a Toggling output. Our Trigger Inline Converter supports all the behaviors of a Touch Trigger An added feature of the Trigger Inline Converter is an alternative input with a color reversing output. This More Info »
Price: from $5.90
Choose Option »

Inline Signal Booster for Third Party Electronics

When adapting our touch controls to third party electronics sometimes a boost is needed to the signal line. This small device connects between the Touch control and a 3-pin extension running to an input. The Signal Booster is about 1/2" x 1/4" x 2" and is in a shrink wrapped package. This active booster passes the More Info »
Price: from $6.60
Choose Option »

Input Splitter

The Input Splitter connects a single Touch Toggle to 2, or 3 inputs. The inputs can be side by side on just one base, or connected to separate bases to perform different functions together. A good use is to operate two Snap type turnouts in a crossover situation with only one Toggle. Please note that this More Info »
Price: from $5.90
Choose Option »

Memory Adapters

Memory Adapters hold individual Toggle positions when powering up the Touch Toggle system. Traditionally Touch Toggles start in the Green position, but adapters (and certain Base units) can remember and control the startup position. These adapters are simply plugged into bases, and the Toggles are plugged into the adapter. They can easily be added to More Info »
Price: from $12.90
Choose Option »

Mini-Cup Toggles

Upgrade: Our Mini-Cups are now injection moulded for a smoother finish and truly durable assembly. The new cups are the exact same dimensions as all the previous Mini-Cups, but with a slightly improved appearance. Sometimes a single control is all you need. When a control panel is overkill these self mounting Touch Toggles can do More Info »
Price: from $13.90
Choose Option »

Multi-Input Adapter with Memory Option

Our Multi-Input Adapter makes two or three Toggles indicate and operate as one. Touch a Toggle on one panel and a matching control in a second panel throws too. The indicators on every Toggle will always show the same color: Add a second panel on the opposite side of a peninsula or module. Control an in-between More Info »
Price: from $8.90
Choose Option »

Powered Tortoise Adapter

Our Powered Tortoise Adapter is a handy problem solver for modules and distant Tortoise motors. Tortoise machines are most commonly controlled using our Direct Base Systems which handle multiple machines from a single base.  This Powered Tortoise Adapter mounts right on a Tortoise! So easy to mount and wire - It's a single Tortoise powering control base built More Info »
Price: from $17.90
Choose Option »

Pulse Follower Adapter

This adapter lets a short power pulse set a Touch Toggle to green or red. The adapter senses a voltage in AC or DC (either polarity) between the center common terminal, and the red or green terminals. The brief external pulse of power can be from 5v to 24v, AC or DC. The inputs are More Info »
Price: from $9.90
Choose Option »

Pushbutton Toggles

Sometimes you need a real pushbutton. There are times when a touch sensing toggle just won't do. Lionel TTMC and Legacy systems create enough radio-noise to false-trigger Touch Toggles. Some folks just like a firm raised button. You can build panels out of conductive material like steel or aluminum. Others need or non-transparent panel materials More Info »
Price: from $9.90
Choose Option »

Third-Light Indicator

The control solution for crossovers!   The Third-Light adds a  second green light to a two light Touch Toggle. This creates a display with either two green lights, or the middle red light showing. The result is perfect for a crossover, with a red light in the middle on the crossover track, and two green More Info »
Price: from $9.60
Choose Option »

Three Way Switch Adapter

Our Three Way Switch Adapters are small plug in units that use 2 or 3 Toggles to control the two switch machines on a three way switch in a logical manner. They will work with any of our control bases, so you can use them to run just about any kind of switch machines. These adapters More Info »
Price: $15.90

Toggle Placement Tool

Our Toggle Placement Tool makes getting Two-Light Touch Toggles accurately lined up in a control panel easy. Just one Toggle Placement Tool is all you need to align all of your Toggles. The most common method of final Toggle placement behind your panel graphic is to power it and while watching from the front, move the More Info »
Price: $12.90

Touch Control for MRServo

Nathan Holmes over at Iowa Scaled Engineering has worked out a great way to get Touch Toggles to work with their single servo operator, the MRServo. Our products were electronically compatible, but difficult to connect until Nathan came up with an elegant idea. Our kit packages the two parts you'll need to make the connection; A More Info »
Price: from $11.90
Choose Option »

Touch Control for Tam Valley Depot Products

Our Touch Triggers are specially made touch controls that can directly replace most* Tam Valley Depot fascia controls. They use the same 3-pin plugs and plug right in. (*For Tam Valley Depot Loconet boards see the note below). We offer our standard "behind the scenes" style that match the size and shape of our original More Info »
Price: from $7.90
Choose Option »

Touch Toggles

Touch Toggles let you create dependable touch-screen control panels with just scissors and tape. When mounted behind a translucent surface (paper behind glass, plastic, etc.) the glowing light from the Touch Toggle indicates both the place to touch, and the controls operational condition. Toggle Toggles alternate from on to off with each touch (touch on, More Info »
Price: from $9.90
Choose Option »

Touch Triggers

A special Touch input for electronic circuits like Digitrax, Tam Valley Depot, Team Digital, RR Circuits Tower-LCC controller, and user programmed micro controllers. Touch Triggers work with third party circuits that actively control the indicator lights. Touch Triggers are exactly the same size and shape as our popular Touch Toggles and have the same choice of More Info »
Price: from $9.90
Choose Option »

Wye Track Adapter

Our Wye Adapter is a small plug in unit that uses three Toggles to control the switch machines installed in a wye track arrangement. It lets you choose your route through the wye in an obvious way. It works with any of our control bases, so it can control just about any kind of switch machine. More Info »
Price: from $15.90
Choose Option »

Comments are closed.